|
|
| Line 1: |
Line 1: |
| − | ==PFAS Transport and Fate== | + | ==Thermal In Situ Sustainable Remediation to Enhance Biotic and Abiotic Reactions and Accelerate Remediation Timeframes== |
| − | The transport and fate of [[Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS)]] in the environment is controlled by the nature of the PFAS source, characteristics of the individual PFAS, and environmental conditions where the PFAS are present. Transport, partitioning, and transformation are the primary processes controlling PFAS fate in the environment. PFAS compounds can also be taken up by both plants and animals, and in some cases, bioaccumulate through the food chain.
| + | Thermal In Situ Sustainable Remediation (TISR<sup>®</sup>; US Pat. Nos. 10,384,246 and 10,688,545) is a cost-effective and adaptable low temperature thermal remediation technology that accelerates contaminant treatment. It achieves this by enhancing biotic and abiotic contaminant degradation rates through a modest increase in subsurface temperature. TISR<sup>®</sup> is suitable for a wide range of hydrogeologic settings. It also offers reduced operational costs, a lower carbon footprint, and possibly shorter remedial timeframes than more conventional methods. |
| − | Understanding PFAS transport and fate is necessary for evaluating the potential risk from a PFAS release and for predictions about PFAS occurrence, migration, and persistence, and about the potential vectors for exposure. This knowledge is important for site characterization, identification of potential sources of PFAS to the site, development of an appropriate conceptual site model (CSM), and selection and predicted performance of remediation strategies.
| + | <div style="float:right;margin:0 0 2em 2em;">__TOC__</div> |
| | | | |
| − | <div style="float:right;margin:0 0 2em 2em;">__TOC__</div>
| + | '''Related Article(s):''' |
| | | | |
| − | '''Related Article(s): '''
| + | *[[Thermal Remediation]] |
| − | * [[Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS)]] | + | *[[Thermal Remediation - Electrical Resistance Heating | Electrical Resistance Heating]] |
| | + | *[[Thermal Conduction Heating (TCH)]] |
| | + | *[[Thermal Remediation - Combined Remedies | Combined Remedies]] |
| | | | |
| | + | '''Contributors:''' Jonah Munholland, Julia Vidonish, and Craig Divine |
| | | | |
| − | '''Contributor(s): ''' | + | '''Key Resources:''' |
| − | Dr. Hunter Anderson and Dr. Mark L. Brusseau
| + | *Thermal In Situ Sustainable Remediation to Enhance Biotic and Abiotic Reactions and Accelerate Remediation Timeframes, Final Report. ESTCP Project ER20-5028<ref>Divine, C., Munholland, J., Zardouzian, E., Justicia-Leon, S., Aspinall, J.V., Randhawa, D., Falta, R., Freedman, D., Becker, M., 2025. Thermal In Situ Sustainable Remediation to Enhance Biotic and Abiotic Reactions and Accelerate Remediation Timeframes, Final Report. Environmental Security Technology Certification Program (ESTCP), Project ER20-5028. [https://serdp-estcp.mil/projects/details/bab4bc87-b4bc-42df-ad0e-11ea0adf27dc/er20-5028-project-overview Project Website] [[Media: ER20-5028 FR DevineEtAl2025.pdf | Final Report.pdf]]</ref>. |
| | | | |
| | + | *Advances in Low-Temperature Thermal Remediation. Munholland ''et al.'', 2024<ref name="MunhollandEtAl2024">Munholland, J, Rosso, D., Randhawa, D., Devine, C., Pennington, A., 2024. Advances in Low-Temperature Thermal Remediation. In: García-Rincón, J., Gatsios, E., Lenhard, R.J., Atekwana, E.A., Naidu, R. (eds), Advances in the Characterisation and Remediation of Sites Contaminated with Petroleum Hydrocarbons, Chapter 18 pp. 623-653. Environmental Contamination Remediation and Management series, Springer Nature. [https://doi.org/10.1007/978-3-031-34447-3_18 doi: 10.1007/978-3-031-34447-3_18] [[Media: MunhollandEtAl2024.pdf | Open Access Chapter]]</ref>. |
| | | | |
| − | '''Key Resource(s): '''
| + | *A Design Tool for Solar Thermal Remediation Using Borehole Heat Exchangers. Ornelles, Falta, and Divine, 2023<ref name="Ornelles">Ornelles, A.D., Falta, R.W., Divine, C.E., 2023. A Design Tool for Solar Thermal Remediation Using Borehole Heat Exchangers. Ground Water, 61(2), pp. 245-254. [https://doi.org/10.1111/gwat.13265 doi: 10.1111/gwat.13265] [https://ngwa.onlinelibrary.wiley.com/doi/epdf/10.1111/gwat.13265 Free download from NGWA]</ref>. |
| − | *[https://pfas-1.itrcweb.org/wp-content/uploads/2020/04/ITRC_PFAS_TechReg_April2020.pdf Per- and Polyfluoroalkyl Substances (PFAS), PFAS-1. ITRC 2020.]<ref name="ITRC2020">Interstate Technology and Regulatory Council (ITRC), 2020. Technical/Regulatory Guidance: Per- and Polyfluoroalkyl Substances (PFAS), PFAS-1. ITRC, PFAS Team, Washington DC. [https://pfas-1.itrcweb.org/wp-content/uploads/2020/04/ITRC_PFAS_TechReg_April2020.pdf Free Download from ITRC]. [[Media: ITRC_PFAS-1.pdf | Report.pdf]]</ref> | |
| | | | |
| − | *[[Media: Brusseau2018manuscript.pdf | Assessing the Potential Contributions of Additional Retention Processes to PFAS Retardation in the Subsurface. Brusseau 2018 (manuscript).]]<ref name="Brusseau2018">Brusseau, M.L., 2018. Assessing the Potential Contributions of Additional Retention Processes to PFAS Retardation in the Subsurface. Science of the Total Environment, 613-614, pp. 176-185. [https://doi.org/10.1016/j.scitotenv.2017.09.065 DOI: 10.1016/j.scitotenv.2017.09.065] [[Media: Brusseau2018manuscript.pdf | Author’s Manuscript]]</ref> | + | *Low-Temperature Thermal Remediation: Gaining Traction as a Green Remedial Alternative. Horst, ''et al.'', 2018<ref name="HorstEtAl2018">Horst, J., Flanders, C., Klemmer, M., Randhawa, D.S., Rosso, D., 2018. Low-Temperature Thermal Remediation: Gaining Traction as a Green Remedial Alternative. Groundwater Monitoring and Remediation, 38(3), pp. 18-27. [https://doi.org/10.1111/gwmr.12295 doi: 10.1111/gwmr.12295]</ref>. |
| | | | |
| | ==Introduction== | | ==Introduction== |
| − | The transport and fate of [[Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS)]] is a rapidly evolving field of science, with many questions that are not yet resolved. Much of the currently available information is based on a few well-studied PFAS compounds. However, there is a large number and variety of PFAS with a wide range of physical and chemical characteristics that affect their behavior in the environment. The transport and fate of some PFAS could differ significantly from the compounds studied to date. Nevertheless, information about the behavior of some PFAS in the environment can be ascertained from the results of currently available research.
| + | [[File: MunhollandFig1.png | thumb | 500 px | Figure 1: Components and layout of a TISR<sup>®</sup> system]] |
| − | | + | TISR<sup>®</sup> utilizes [[Wikipedia: Downhole heat exchanger | borehole heat exchangers (BHEs)]] to heat target treatment areas in the subsurface. This is achieved through a combination of solar collectors, which harness solar radiation as heat, and the utilization of other heat sources such as waste heat or hybrid heating with heat pumps. That heat is then transferred to the subsurface via a closed loop circulation system connected to the BHEs (Figure 1). By incorporating these additional heat sources, TISR<sup>®</sup> ensures a more robust and constant heat supply, enabling customization of the system to address specific site challenges and facilitate efficient heat transfer. |
| − | PFAS transport and fate in the environment is controlled by the nature of the PFAS source, characteristics of the individual PFAS, and environmental conditions where the PFAS are present. Perfluoroalkyl acids (PFAAs) (see [[Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) | PFAS]] for nomenclature) are strong acids and are anionic in the environmentally-relevant pH range. They are extremely persistent in the environment and do not degrade or transform under typical environmental conditions. Polyfluoroalkyl substances (see [[Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) | PFAS]] for nomenclature) include compounds that have the potential to degrade to PFAAs. These compounds are commonly referred to as PFAA precursors or just ‘precursors’. Because some polyfluoroalkyl substances can degrade into PFAA via biotic or abiotic degradation pathways, PFAAs are sometimes referred to as “terminal PFAS” or “terminal degradation products”.
| |
| − | The most important molecular properties controlling PFAA transport are the carbon chain length and functional moieties of the headgroups (e.g., sulfonate, carboxylate). The molecular properties of PFAA precursors are more varied, with different carbon chain lengths, headgroups and ionic states<ref name="Buck2011">Buck, R.C., Franklin, J., Berger, U., Conder, J.M., Cousins, I.T., de Voogt, P., Jensen, A.A., Kannan, K., Mabury, S.A., and van Leeuwen, S.P.J., 2011. Perfluoroalkyl and Polyfluoroalkyl Substances in the Environment: Terminology, Classification, and Origins. Integrated Environmental Assessment and Management, 7(4): pp. 513-541. [ https://doi.org/10.1002/ieam.258 DOI: 10.1002/ieam.258] [https://setac.onlinelibrary.wiley.com/doi/epdf/10.1002/ieam.258 Open Access Article]</ref><ref name="Wang2017">Wang, Z., DeWitt, J.C., Higgins, C.P., and Cousins, I.T., 2017. A Never-Ending Story of Per- and Polyfluoroalkyl Substances (PFASs)? Environmental Science and Technology, 51(5), pp. 2508-2518. American Chemical Society. [https://doi.org/10.1021/acs.est.6b04806 DOI: 10.1021/acs.est.6b04806] [https://pubs.acs.org/doi/pdf/10.1021/acs.est.6b04806 Free Download from ACS]</ref> (see [[Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) | PFAS]]). All of these properties can influence transport and fate of PFAA precursors in the environment.
| |
| − | | |
| − | Important environmental characteristics include the nature of the source (mode of input into the environment), the length of time that the source was active, and the magnitude of the input, as well as precipitation and infiltration rates, depth to groundwater, surface water and groundwater flow rates and interactions, prevailing atmospheric conditions, the properties of the porous-media (e.g., soil and sediment) and aqueous solution, microbiological factors, and the presence of additional fluid phases such as air and non-aqueous phase liquids [[Wikipedia: Non-aqueous phase liquid | (NAPLs)]] in the vadose zone and water-saturated source. In the subsurface, soil characteristics (texture, organic carbon content, clay mineralogy, metal-oxide content, solid surface area, surface charge, and exchange capacity) and solution characteristics (pH, redox potential, major ion chemistry, and co-contaminants) can influence PFAS transport and fate.
| |
| | | | |
| − | ==PFAS Transport and Fate Processes==
| + | The heating of the subsurface through TISR<sup>®</sup> accelerates various processes such as biodegradation, abiotic reactions, and contaminant desorption and dissolution. The technology is also suitable for diverse hydrogeologic environments, including sites with low permeability zones, due to the relatively uniform thermal conductivity of geologic materials, which is unaffected by grain size<ref name="MunhollandEtAl2024"/>. This versatility allows TISR<sup>®</sup> to integrate with conventional remediation technologies, enhancing their performance. |
| − | [[File:AndersonBrusseau1w2Fig1.png | thumb | 600px | Figure 1. Illustration of PFAS partitioning and transformation processes. Source: D. Adamson, GSI, used with permission.]]
| |
| − | Transport, partitioning, and transformation are the primary processes controlling PFAS fate in the environment (Figure 1). PFAS compounds can also be taken up by both plants and animals, and in some cases, bioaccumulate through the food chain. However, PFAS uptake and bioaccumulation is not discussed in this article (see “Environmental Concern” section of [[Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS)]]).
| |
| | | | |
| − | * '''Transport:''' PFAS can be transported substantial distances in the atmosphere<ref name="Ahrens2012">Ahrens, L., Harner, T., Shoeib, M., Lane, D.A. and Murphy, J.G., 2012. Improved Characterization of Gas–Particle Partitioning for Per- and Polyfluoroalkyl Substances in the Atmosphere Using Annular Diffusion Denuder Samplers. Environmental Science and Technology, 46(13), pp. 7199-7206. [https://doi.org/10.1021/es300898s DOI: 10.1021/es300898s] Free download available from [https://www.researchgate.net/profile/Tom_Harner/publication/225046057_Improved_Characterization_of_Gas-Particle_Partitioning_for_Per-_and_Polyfluoroalkyl_Substances_in_the_Atmosphere_Using_Annular_Diffusion_Denuder_Samplers/links/5cc730c4299bf12097893fdc/Improved-Characterization-of-Gas-Particle-Partitioning-for-Per-and-Polyfluoroalkyl-Substances-in-the-Atmosphere-Using-Annular-Diffusion-Denuder-Samplers.pdf ResearchGate].</ref>, surface water<ref name="Taniyasu2013">Taniyasu, S., Yamashita, N., Moon, H.B., Kwok, K.Y., Lam, P.K., Horii, Y., Petrick, G. and Kannan, K., 2013. Does wet precipitation represent local and regional atmospheric transportation by perfluorinated alkyl substances? Environment International, 55, pp. 25-32. [https://doi.org/10.1016/j.envint.2013.02.005 DOI: 10.1016/j.envint.2013.02.005]</ref>, soil<ref name="Braunig2017">Bräunig, J., Baduel, C., Heffernan, A., Rotander, A., Donaldson, E. and Mueller, J.F., 2017. Fate and redistribution of perfluoroalkyl acids through AFFF-impacted groundwater. Science of the Total Environment, 596, pp. 360-368. [https://doi.org/10.1016/j.scitotenv.2017.04.095 DOI: 10.1016/j.scitotenv.2017.04.095]</ref>, and groundwater<ref name="Weber2017">Weber, A.K., Barber, L.B., LeBlanc, D.R., Sunderland, E.M. and Vecitis, C.D., 2017. Geochemical and Hydrologic Factors Controlling Subsurface Transport of Poly- and Perfluoroalkyl Substances, Cape Cod, Massachusetts. Environmental Science and Technology, 51(8), pp. 4269-4279. [https://doi.org/10.1021/acs.est.6b05573 DOI: 10.1021/acs.est.6b05573] [https://bgc.seas.harvard.edu/assets/weber2017_final.pdf Free Download]</ref>. The primary mechanisms controlling PFAS transport are [[Wikipedia:Advection | advection]] and [[Wikipedia:Dispersive_mass_transfer | dispersion]], similar to other dissolved compounds. For additional information on transport in groundwater, see [[Advection and Groundwater Flow]] and [[Dispersion and Diffusion]].
| + | One of the key advantages of TISR<sup>®</sup> is its ability to accelerate treatment processes while minimizing energy consumption. By harnessing renewable and sustainable energy sources such as solar radiation and effectively utilizing waste heat or hybrid heating with heat pumps, TISR<sup>®</sup> delivers an efficient, cost-effective remediation solution. Compatibility with multiple conventional remediation technologies makes it an effective option for addressing a variety of contamination challenges. |
| | | | |
| − | * '''Partitioning:''' Partitioning of PFAS between the mobile and immobile phases is one of the most important processes controlling the rate of migration in the environment. The primary mobile phases are typically air and water. Relatively immobile phases include stream sediments, soils, aquifer material, NAPLs, and interfaces between different phases (air-water, NAPL-water). Partitioning of a significant portion of the PFAS mass into an immobile phase increases the amount of material stored in the system and slows the apparent rate of migration in the mobile phase – a phenomenon that has been observed in field metadata<ref name="Anderson2019">Anderson, R.H., Adamson, D.T. and Stroo, H.F., 2019. Partitioning of poly-and perfluoroalkyl substances from soil to groundwater within aqueous film-forming foam source zones. Journal of Contaminant Hydrology, 220, pp. 59-65. [https://doi.org/10.1016/j.jconhyd.2018.11.011 DOI: 10.1016/j.jconhyd.2018.11.011] Manuscript available from [https://www.researchgate.net/profile/Hans_Stroo3/publication/329227107_Partitioning_of_poly-_and_perfluoroalkyl_substances_from_soil_to_groundwater_WITHIN_aqueous_film-forming_foam_source_zones/links/5e56996b299bf1bdb83e2f69/Partitioning-of-poly-and-perfluoroalkyl-substances-from-soil-to-groundwater-WITHIN-aqueous-film-forming-foam-source-zones.pdf ResearchGate]</ref>.
| + | ==Scientific Principles== |
| | + | [[File: MunhollandFig2.png | thumb | 500 px | Figure 2: Effect of temperature on hydrolysis rates for VOCs]] |
| | + | During the TISR<sup>®</sup> heating process, thermal conduction and advection play a crucial role in boosting physical, biological, and chemical processes within the treatment zones, leading to enhanced attenuation, degradation, and removal of contaminants from the subsurface<ref>Dettmer, K., 2002. A Discussion of the Effects of Thermal Remediation Treatments on Microbial Degradation Processes. U.S. Environmental Protection Agency, Office of Solid Waste and Emergency Response, Technology Innovation Office, Washington, DC. [[Media: dettmer2002.pdf | free report]] [https://www.clu-in.org/download/techdrct/dettmer.pdf free download from clu-in.org]</ref><ref name="HorstEtAl2018"/>. TISR<sup>®</sup> systems are typically designed to enhance the biological activity and performance of other active technologies, such as [[Wikipedia: Air sparging | air sparge]]/[[Soil Vapor Extraction (SVE) | soil vapor extraction]] (AS/SVE) or [[Chemical Oxidation (In Situ - ISCO) | chemical oxidation]], by increasing the subsurface temperature by approximately 10°C to 20°C. The target groundwater temperature is often set to reach up to about 35°C, which is the optimal temperature for promoting the activity of mesophilic microbial communities responsible for biodegradation of certain contaminants. In cases where the objective is to maximize abiotic hydrolysis mechanisms, such as for some chlorinated alkanes, TISR<sup>®</sup> systems can be designed to reach a final groundwater temperature of up to 60°C. |
| | | | |
| − | * '''Transformation:''' Transformation of PFAS is controlled by the molecular structure of the individual compounds. Perfluorinated compounds, including PFAAs, are resistant to abiotic and biotic transformation reactions under typical conditions and highly persistent in the environment. In contrast, precursors can be transformed by both abiotic and biotic processes, often resulting in the production of so-called “terminal” PFAA daughter products.
| + | The effectiveness of TISR<sup>®</sup> in enhancing treatment performance has been demonstrated through several mechanisms, which are discussed below: |
| | | | |
| − | ==Transport and Partitioning in the Atmosphere==
| + | *Primary dechlorinating bacteria, such as [[Wikipedia: Dehalococcoides | Dehalococcoides]] and [[Wikipedia: Dehalogenimonas | Dehalogenimonas]], are known to be [[Wikipedia: Mesophile | mesophilic]]. Therefore, increasing the temperature can significantly enhance microbial activity and biodegradation by multiple orders of magnitude<ref>Macbeth, T., Truex, M., Powell, T., Michalsen, M., 2012. Combining Low-Energy Electrical Resistance Heating with Biotic and Abiotic Reactions for Treatment of Chlorinated Solvent DNAPL Source Areas. [https://serdp-estcp.mil/ Environmental Security Technology Certification Program (ESTCP)] [https://serdp-estcp.mil/projects/details/877a3b41-6bed-4f4a-b43a-87fbcd9b7f0b/er-200719-project-overview Project ER-200719 webpage] [[Media: Macbeth2012_ER-200719-FR.pdf | free download]] [https://www.youtube.com/watch?v=-EbwKbs8scE Project Summary Presentation]</ref>. |
| − | Air serves as a transport media for PFAS, particularly for uncharged polyfluorinated PFAS. Airborne PFAS transport contributes to global distribution and can lead to localized deposition to soils and surface water in the vicinity of emission sources<ref name="Simcik2005">Simcik, M.F. and Dorweiler, K.J., 2005. Ratio of Perfluorochemical Concentrations as a Tracer of Atmospheric Deposition to Surface Waters. Environmental Science and Technology, 39(22), pp. 8678-8683. [https://doi.org/10.1021/es0511218 DOI: 10.1021/es0511218] Free download available from [https://www.researchgate.net/profile/Matt_Simcik/publication/7444956_Ratio_of_Perfluorochemical_Concentrations_as_a_Tracer_of_Atmospheric_Deposition_to_Surface_Waters/links/5f035861299bf1881603c3be/Ratio-of-Perfluorochemical-Concentrations-as-a-Tracer-of-Atmospheric-Deposition-to-Surface-Waters.pdf ResearchGate]</ref><ref name="Prevedouros2006">Prevedouros, K., Cousins, I.T., Buck, R.C. and Korzeniowski, S.H., 2006. Sources, Fate and Transport of Perfluorocarboxylates. Environmental Science and Technology, 40(1), pp. 32-44. [https://doi.org/10.1021/es0512475 DOI: 10.1021/es0512475] Free download available from [https://d1wqtxts1xzle7.cloudfront.net/39945519/Sources_Fate_and_Transport_of_Perfluoroc20151112-1647-19vcvbf.pdf?1447365456=&response-content-disposition=inline%3B+filename%3DSources_Fate_and_Transport_of_Perfluoroc.pdf&Expires=1605023809&Signature=Z6KqgaDN6lKdAazoe6qoASoCtVystG5i~5EnrTcb~qMg3xZPz4O49Kghh62WmMzqEKE788~6EwrnlBVo9o6cM0hjf2vymFYxg4mx-eSIOEonfFjk6RonSaWp5gRbA6m~SNjwsjaKXID3OQyWIlLVpUd2LzAdI5rLGFA~gIXXtNPyCArLuGn-kbPYUIcBUg5TIkTZ6TDLXF~ujmzK9tNv~55UYabsJL4pmwIGC2sNGkEyJrYMfU577fbactdrmQXTJH7XbgpfDSfd4-xWkDZTdvVf~TypDDqUCZdtCkY8wINdpqtfe1KEzLrAj7rxxALAHUYxlVbPB45XTkLAGe5qww__&Key-Pair-Id=APKAJLOHF5GGSLRBV4ZA Academia]</ref><ref name="Ahrens2011">Ahrens, L., Shoeib, M., Harner, T., Lane, D.A., Guo, R. and Reiner, E.J., 2011. Comparison of Annular Diffusion Denuder and High Volume Air Samplers for Measuring Per- and Polyfluoroalkyl Substances in the Atmosphere." Analytical Chemistry, 83(24), pp. 9622-9628. [https://doi.org/10.1021/ac202414w DOI: 10.1021/ac202414w] Free download available from [https://www.informea.org/sites/default/files/imported-documents/UNEP-POPS-POPRC11FU-SUBM-PFOA-Canada-2-20151211.En.pdf Informea].</ref><ref name="Rauert2018">Rauert, C., Shoieb, M., Schuster, J.K., Eng, A. and Harner, T., 2018. Atmospheric concentrations and trends of poly-and perfluoroalkyl substances (PFAS) and volatile methyl siloxanes (VMS) over 7 years of sampling in the Global Atmospheric Passive Sampling (GAPS) network. Environmental Pollution, 238, pp. 94-102. [https://doi.org/10.1016/j.envpol.2018.03.017 DOI: 10.1016/j.envpol.2018.03.017] Open access article available from [https://reader.elsevier.com/reader/sd/pii/S0269749117352521?token=4C770E6E8AEDB0B3BA6A1D5B2C20ED5385F81823612551FA3380AAA1DA7A978F9CB36834AF6B7F91F35FF57E32013252 ScienceDirect] [[Media:Rauert2018.pdf | Report.pdf]]</ref>.
| |
| | | | |
| − | PFAAs, which are ionic and possess a negative charge under ambient environmental conditions, are far less volatile than many other groundwater contaminants. An online database of vapor pressures and Henry’s Law constants for different PFAS, including PFAAs, is maintained by the Interstate Technology Regulatory Council<ref name="ITRC2020"/>. In general, vapor pressures of PFAS are low and water solubilities are high, limiting partitioning from water to air<ref name="ITRC2020"/>. However, under certain conditions, particularly within industrial stack emissions, PFAS can be transported through the atmosphere in both the gas phase and associated with fugitive particulates. In particular, volatile compounds including fluorotelomer alcohols (FTOHs) may be present in the gas phase, whereas, PFAAs can aerosolize and be transported as particulates<ref name="Ahrens2012"/>. In addition, precursors can be transformed to PFAAs in the atmosphere, which can result in PFAA deposition.
| + | *Reduced iron minerals, particularly iron sulfides, can participate in the abiotic degradation of chlorinated ethenes and other contaminants. The rates of these reactions generally depend on temperature, following the [[Wikipedia: Arrhenius equation | Arrhenius equation]]. |
| − | Short-range atmospheric transport and deposition can result in PFAS contamination in terrestrial and aquatic systems near points of significant emissions, impacting soil, groundwater, and other media of concern<ref name="Fang2018">Fang, X., Wang, Q., Zhao, Z., Tang, J., Tian, C., Yao, Y., Yu, J. and Sun, H., 2018. Distribution and dry deposition of alternative and legacy perfluoroalkyl and polyfluoroalkyl substances in the air above the Bohai and Yellow Seas, China. Atmospheric Environment, 192, pp. 128-135. [https://doi.org/10.1016/j.atmosenv.2018.08.052 DOI: 10.1016/j.atmosenv.2018.08.052]</ref><ref name="Brandsma2019">Brandsma, S.H., Koekkoek, J.C., van Velzen, M.J.M. and de Boer, J., 2019. The PFOA substitute GenX detected in the environment near a fluoropolymer manufacturing plant in the Netherlands. Chemosphere, 220, pp. 493-500. [https://doi.org/10.1016/j.chemosphere.2018.12.135 DOI: 10.1016/j.chemosphere.2018.12.135] Open access article available from [https://reader.elsevier.com/reader/sd/pii/S0045653518324706?token=E541D5C4B200C8626A86F41049FE9DCA92652BC9A8BA7D9E47832C08070AB5AF256F4872474C50B5C4908F5CA4C24947 ScienceDirect]. [[Media: Brandsma2019.pdf | Report.pdf]]</ref>. Releases of ionic PFAS from factories are likely tied to particulate matter, which settle to the ground in dry weather and are also wet-scavenged by precipitation<ref name="Barton2006">Barton, C.A., Butler, L.E., Zarzecki, C.J., Flaherty, J. and Kaiser, M., 2006. Characterizing Perfluorooctanoate in Ambient Air near the Fence Line of a Manufacturing Facility: Comparing Modeled and Monitored Values. Journal of the Air and Waste Management Association, 56(1), pp. 48-55. [https://doi.org/10.1080/10473289.2006.10464429 DOI: 10.1080/10473289.2006.10464429] Free access article available from [https://www.tandfonline.com/doi/pdf/10.1080/10473289.2006.10464429?needAccess=true Taylor and Francis Online] [[Media: Barton2006.pdf | Report.pdf]]</ref>. The impact of other potential sources, such as combustion emissions or wind-blown fire-fighting foam from fire training and fire response sites, on the fate and transport of PFAS in air may need to be assessed.
| |
| | | | |
| − | Long-range transport processes are responsible for the wide distribution of neutral and ionic PFAS across the Earth as evidenced by their occurrence in biota, surface snow, ice cores, seawater, and other environmental media in regions as remote as the Arctic and Antarctic<ref name="Bossi2016">Bossi, R., Vorkamp, K. and Skov, H., 2016. Concentrations of organochlorine pesticides, polybrominated diphenyl ethers and perfluorinated compounds in the atmosphere of North Greenland. Environmental Pollution, 217, pp. 4-10. [https://doi.org/10.1016/j.envpol.2015.12.026 DOI: 10.1016/j.envpol.2015.12.026]</ref><ref name="Ahrens2010">Ahrens, L., Gerwinski, W., Theobald, N. and Ebinghaus, R., 2010. Sources of polyfluoroalkyl compounds in the North Sea, Baltic Sea and Norwegian Sea: Evidence from their spatial distribution in surface water. Marine Pollution Bulletin, 60(2), pp. 255-260. [https://doi.org/10.1016/j.marpolbul.2009.09.013 DOI: 10.1016/j.marpolbul.2009.09.013]</ref>.
| + | *[[Wikipedia: Hydrolysis | Hydrolysis]] rates for certain compounds exhibit high temperature dependence. For example, a 10°C increase can lead to a 50% reduction in the half-life of [[Wikipedia: 1,1,1-Trichloroethane | 1,1,1-trichloroethane (1,1,1-TCA)]]<ref>Suthersan, S., Horst, J., Klemmer, M., Malone, D., 2012. Temperature-Activated Auto-Decomposition Reactions: An Under-Utilized In Situ Remediation Solution. Groundwater Monitoring and Remediation, 32(3), pp. 34-40. [https://doi.org/10.1111/j.1745-6592.2012.01407.x doi: 10.1111/j.1745-6592.2012.01407.x]</ref>. Figure 2 presents the calculated temperature-dependent hydrolysis rates for 13 common [[Wikipedia: Volatile organic compound | volatile organic compounds (VOCs)]] at a pH of 7. |
| − | Distribution of PFAS to remote regions far removed from direct industrial input is believed to occur from both: a) long-range atmospheric transport and subsequent degradation of volatile precursors; and b) transport via ocean currents and release into the air as marine aerosols (sea spray)<ref name="DeSilva2009">De Silva, A.O., Muir, D.C. and Mabury, S.A., 2009. Distribution of perfluorocarboxylate isomers in select samples from the North American environment. Environmental Toxicology and Chemistry: An International Journal 28(9), pp. 1801-1814. [https://doi.org/10.1897/08-500.1 DOI: 10.1897/08-500.1]</ref><ref name="Armitage2009">Armitage, J.M., 2009. Modeling the global fate and transport of perfluoroalkylated substances (PFAS). Doctoral Dissertation, Institutionen för tillämpad miljövetenskap (ITM), Stockholm University. [[Media: Armitage2009.pdf | Report.pdf]]</ref>.
| |
| | | | |
| − | ==Transport and Partitioning in Aqueous Systems==
| + | *[[Wikipedia: Henry's law | Henry's Law]] constant, [[Wikipedia: Vapor pressure | vapor pressure]], solubility, and viscosity values are also temperature dependent. For instance, the Henry's Law constant values for many VOCs, including [[Wikipedia: Tetrachloroethylene | tetrachloroethene (PCE)]], have been observed to double between 8 and 24°C<ref>Chen, F., Freedman, D.L., Falta, R.W., Murdoch, L.C., 2012. Henry's law constants of chlorinated solvents at elevated temperatures. Chemosphere, 86(2), pp.156-165. [https://doi.org/10.1016/j.chemosphere.2011.10.004 doi: 10.1016/j.chemosphere.2011.10.004]</ref>. |
| − | PFAS adsorb from water to a variety of solid materials including organic materials, clay minerals, metal oxides, and granular activated carbon<ref name="Du2014">Du, Z., Deng, S., Bei, Y., Huang, Q., Wang, B., Huang, J. and Yu, G., 2014. Adsorption behavior and mechanism of perfluorinated compounds on various adsorbents – A review. Journal of Hazardous Materials, 274, pp. 443-454. [https://doi.org/10.1016/j.jhazmat.2014.04.038 DOI: 10.1016/j.jhazmat.2014.04.038]</ref>. This process is thought to occur through two primary mechanisms: 1) sorption to organic-carbon components of the solids; and 2) electrostatic (and other) interactions with inorganic constituents of the solids, including clay minerals and metal-oxides<ref name="Guelfo2013">Guelfo, J.L. and Higgins, C.P., 2013. Subsurface Transport Potential of Perfluoroalkyl Acids at Aqueous Film-Forming Foam (AFFF)-Impacted Sites. Environmental Science and Technology, 47(9), pp. 4164-4171. [https://doi.org/10.1021/es3048043 DOI: 10.1021/es3048043] [https://mountainscholar.org/bitstream/handle/11124/80055/Guelfo_mines_0052E_10298.pdf?sequence=1#page=64 Doctoral Dissertation]</ref><ref name="Zhao2014">Zhao, L., Bian, J., Zhang, Y., Zhu, L. and Liu, Z., 2014. Comparison of the sorption behaviors and mechanisms of perfluorosulfonates and perfluorocarboxylic acids on three kinds of clay minerals. Chemosphere, 114, pp. 51-58. [https://doi.org/10.1016/j.chemosphere.2014.03.098 DOI: 10.1016/j.chemosphere.2014.03.098] Free download available from [https://www.researchgate.net/profile/Lixia_Zhao8/publication/262148355_Comparison_of_the_sorption_behaviors_and_mechanisms_of_perfluorosulfonates_and_perfluorocarboxylic_acids_on_three_kinds_of_clay_minerals/links/5b1be5dca6fdcca67b681a4f/Comparison-of-the-sorption-behaviors-and-mechanisms-of-perfluorosulfonates-and-perfluorocarboxylic-acids-on-three-kinds-of-clay-minerals.pdf ResearchGate].</ref>. The relative contribution of each mechanism varies depending on surface chemistry and other geochemical factors, as well as the molecular properties of the PFAS. In general, the impact of electrostatic interactions with charged soil constituents is more important for PFAS than non-polar, hydrophobic organic contaminants (e.g. hydrocarbons, chlorinated solvents). Adsorption of PFAS by solids is often nonlinear, with greater sorption at lower solute concentrations. The impacts of adsorption kinetics and their potential reversibility on PFAS transport have not yet been examined for most PFAS compounds.
| |
| | | | |
| − | Sorption of hydrocarbons, chlorinated solvents and other hydrophobic organics is often controlled the by organic-carbon components of the solid phase (see [[Sorption of Organic Contaminants]]). However, studies of PFAS sorption to solid phase organic carbon have reported conflicting results. In a study of field sites with aqueous film-forming foam (AFFF, a type of fire-fighting foam) releases, solid phase organic carbon content was found to significantly influence PFAS soil-to-groundwater concentration ratios. Statistical modeling was then used to derive apparent organic carbon partition coefficients for 18 different PFAS<ref name="Anderson2019"/>. A recent compilation of published organic carbon partition coefficients found a good correspondence to PFAS molecular structure<ref name="Brusseau2019a">Brusseau, M.L., 2019. Estimating the relative magnitudes of adsorption to solid-water and air/oil-water interfaces for per-and poly-fluoroalkyl substances. Environmental Pollution, 254B, p. 113102. [https://doi.org/10.1016/j.envpol.2019.113102 DOI: 10.1016/j.envpol.2019.113102]</ref>. However, other studies have shown a general lack of correlation between solid phase partition coefficients and organic carbon<ref name="Li2018">Li, Y., Oliver, D.P. and Kookana, R.S., 2018. A critical analysis of published data to discern the role of soil and sediment properties in determining sorption of per and polyfluoroalkyl substances (PFASs). Science of the Total Environment, 628, pp. 110-120. [https://doi.org/10.1016/j.scitotenv.2018.01.167 DOI: 10.1016/j.scitotenv.2018.01.167]</ref>. It is possible that greater variability may be observed for broader data sets that incorporate different ranges of PFAS concentrations, different solution conditions, different measurement methods, and field-based data which often have less well-defined conditions and may also be influenced by other retention processes<ref name="Anderson2019"/><ref name="Brusseau2019a"/>.
| + | *Rates of other processes that often limit the pace of remediation, such as dissolution, desorption, and [[Matrix Diffusion | back diffusion]], are positively correlated with temperature. This results in an enhanced bioavailability of contaminant mass that may otherwise be inaccessible. |
| | | | |
| − | [[File:AndersonBrusseau1w2Fig2.png | thumb | 500px | Figure 2. Example of expected orientation and accumulation of PFAS at air-water interface. Source: D. Adamson, GSI, used with permission.]]
| + | These various mechanisms collectively contribute to the improved performance of other active treatments when temperature is moderately increased by utilization of TISR®. |
| − | Most solids present in the environment contain both fixed-charged (negative) and variably charged surfaces. At neutral to high pH, variably charged clay minerals have a net-negative charge. As a result, negatively charged PFAAs do not strongly interact electrostatically in most soils, although as the soil pH decreases electrostatic sorption would be expected to increase in soils with variably charged clay minerals. Cationic and zwitterionic precursors are expected to be more strongly sorbed than anionic PFAAs in most environments due to well-established cation exchange reactions. Other factors, including ionic strength, composition, and the presence of co-solutes, can affect adsorption of PFAS<ref name="Higgins2006">Higgins, C.P. and Luthy, R.G., 2006. Sorption of Perfluorinated Surfactants on Sediments. Environmental Science and Technology, 40(23), pp. 7251-7256. [https://doi.org/10.1021/es061000n DOI: 10.1021/es061000n]</ref><ref name="Chen2009">Chen, H., Chen, S., Quan, X., Zhao, Y. and Zhao, H., 2009. Sorption of perfluorooctane sulfonate (PFOS) on oil and oil-derived black carbon: Influence of solution pH and [Ca2+]. Chemosphere, 77(10), pp. 1406-1411. [https://doi.org/10.1016/j.chemosphere.2009.09.008 DOI: 10.1016/j.chemosphere.2009.09.008]</ref><ref name="Pan2009">Pan, G., Jia, C., Zhao, D., You, C., Chen, H. and Jiang, G., 2009. Effect of cationic and anionic surfactants on the sorption and desorption of perfluorooctane sulfonate (PFOS) on natural sediments. Environmental Pollution, 157(1), pp.325-330. [https://doi.org/10.1016/j.envpol.2008.06.035 DOI: 10.1016/j.envpol.2008.06.035] Free download available from [https://www.researchgate.net/profile/Gang_Pan2/publication/23189567_Effect_of_cationic_and_anionic_surfactants_on_the_sorption_and_desorption_of_perfluorooctane_sulfonate_PFOS_on_natural_sediments/links/5be19d23a6fdcc3a8dc2550d/Effect-of-cationic-and-anionic-surfactants-on-the-sorption-and-desorption-of-perfluorooctane-sulfonate-PFOS-on-natural-sediments.pdf ResearchGate]</ref><ref name="Guelfo2013"/><ref name="Zhao2014"/>.
| |
| | | | |
| − | Most PFAS compounds act as surface-active agents (or [[Wikipedia:Surfactant | surfactants]]) due to the presence of a hydrophilic headgroup and a hydrophobic tail. The hydrophilic headgroup will preferentially partition to the aqueous phase and the hydrophobic tail will preferentially partition to the non-aqueous phase (air or organic material). As a result, PFAS tend to accumulate at interfaces (air-water, water-NAPL, water-solid) (Figure 2). This tendency to accumulate at interfaces can influence transport in the atmosphere (on water droplets and hydrated aerosols), in the vadose or unsaturated zone at air-water interfaces, in the presence of NAPLs, and in wastewater treatment systems<ref name="Brusseau2018"/><ref name="Brusseau2019b">Brusseau, M.L., 2019. The Influence of Molecular Structure on the Adsorption of PFAS to Fluid-Fluid Interfaces: Using QSPR to Predict Interfacial Adsorption Coefficients. Water Research, 152, pp. 148-158. [https://doi.org/10.1016/j.watres.2018.12.057 DOI: 10.1016/j.watres.2018.12.057] [https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6374777/ Author’s Manuscript]</ref>.
| + | ==Implementation and Practical Considerations== |
| − |
| + | [[File: MunhollandFig3.png | thumb | 500 px | Figure 3: Transformation of 1,1-DCE and VC following installation of a TISR<sup>®</sup> system]] |
| − | In theoretical and experimental studies of transport in unsaturated porous media, adsorption at the air-water interface increased PFOS and PFOA retention<ref name="Brusseau2018"/><ref name="Lyu2018">Lyu, Y., Brusseau, M.L., Chen, W., Yan, N., Fu, X., and Lin, X., 2018. Adsorption of PFOA at the Air-Water Interface during Transport in Unsaturated Porous Media. Environmental Science and Technology, 52(14), pp. 7745-7753. [https://doi.org/10.1021/acs.est.8b02348 DOI: 10.1021/acs.est.8b02348] [https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6312111/ Author’s Manuscript]</ref><ref name="BrusseauEtAl2019">Brusseau, M.L., Yan, N., Van Glubt, S., Wang, Y., Chen, W., Lyu, Y., Dungan, B., Carroll, K.C., and Holguin, F.O., 2019. Comprehensive Retention Model for PFAS Transport in Subsurface Systems. Water Research, 148, pp. 41-50. [https://doi.org/10.1016/j.watres.2018.10.035 DOI: 10.1016/j.watres.2018.10.035] [https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6294326/ Author’s Manuscript]</ref>, contributing approximately 20% to 80% of total retention in sands and soil. The impact of oil-water interfacial adsorption on PFAS transport was also quantitatively characterized in recent studies and shown to contribute to total retention on a similar scale as air-water interfacial adsorption<ref name="Brusseau2018"/><ref name="BrusseauEtAl2019"/>. These processes may result in increased PFAS mass retained in NAPL source zones, increased PFAS sorption with the resulting retardation of transport, and greater persistence of dissolved PFAS in the environment.
| + | TISR<sup>®</sup> has proven successful in reducing contaminant concentrations across diverse hydrogeologic settings, including those with low and complex hydraulic conductivity conditions. Figure 3 shows a sharp initial decrease in [[Wikipedia: 1,1-Dichloroethylene | 1,1-dichloroethene (1,1-DCE)]] concentrations due to enhanced biodegradation, and then a temporary small increase followed by subsequent decreases in 1,1-DCE concentrations to below detection limits, possibly the result of temperature-enhanced desorption or dissolution of 1,1-DCE from the aquifer. There is also a temporary increase and then decrease in the concentrations of [[Wikipedia: Vinyl chloride | vinyl chloride (VC)]] (a biodegradation product) to very low levels. |
| | | | |
| − | ==Transformation==
| + | The TISR<sup>®</sup> system construction utilizes off-the-shelf modular components, promoting cost-efficiency, reusability, and a reduced carbon footprint. Waste heat can supplement or replace the solar setup, and remote monitoring through dashboard apps reduces operation and maintenance costs. TISR® projects typically achieve an average capital cost payback within 1 to 3 years due to accelerated rates of remediation. |
| − | [[File:AndersonBrusseau1w2Fig3.png | thumb | 600px | Figure 3. Conceptual model of precursor transformation resulting in the formation of PFAAs. Source L. Trozzolo, TRC and C. Higgins, Colorado School of Mines, used with permission.]]
| |
| − | Certain polyfluorinated substances have the potential to transform to other PFAS, with PFAAs as the typical terminal daughter products. These polyfluorinated substances are often referred to as “precursors”. The transformation potential of polyfluorinated precursors is influenced by the presence, location, and number of carbon-hydrogen (C-H) bonds and potentially carbon-oxygen (C-O) bonds throughout the carbon chain. Specifically, PFAS with C-H bonds are subject to a variety of biotic and abiotic reactions that ultimately result in the formation of PFAAs with perfluorinated carbon chains of the same length or shorter than the initial polyfluorinated precursor<ref name="Houtz2013">Houtz, E.F., Higgins, C.P., Field, J.A. and Sedlak, D.L., 2013. Persistence of perfluoroalkyl acid precursors in AFFF-impacted groundwater and soil. Environmental Science and Technology, 47(15), pp. 8187-8195. [https://doi.org/10.1021/es4018877 DOI: 10.1021/es4018877] Free download from [https://www.researchgate.net/profile/Erika_Houtz/publication/252323955_Persistence_of_Perfluoroalkyl_Acid_Precursors_in_AFFF-Impacted_Groundwater_and_Soil/links/59dbddeeaca2728e2018336d/Persistence-of-Perfluoroalkyl-Acid-Precursors-in-AFFF-Impacted-Groundwater-and-Soil.pdf ReseqarchGate]</ref><ref name="McGuire2014">McGuire, M.E., Schaefer, C., Richards, T., Backe, W.J., Field, J.A., Houtz, E., Sedlak, D.L., Guelfo, J.L., Wunsch, A., and Higgins, C.P., 2014. Evidence of Remediation-Induced Alteration of Subsurface Poly- and Perfluoroalkyl Substance Distribution at a Former Firefighter Training Area. Environmental Science and Technology, 48(12) pp. 6644-6652. [https://doi.org/10.1021/es5006187 DOI: 10.1021/es5006187] Manuscript available from [https://ir.library.oregonstate.edu/downloads/td96k706f Oregon State University]</ref><ref name="Anderson2016">Anderson, R.H., Long, G.C., Porter, R.C. and Anderson, J.K., 2016. Occurrence of select perfluoroalkyl substances at US Air Force aqueous film-forming foam release sites other than fire-training areas: Field-validation of critical fate and transport properties. Chemosphere, 150, pp. 678-685. [https://doi.org/10.1016/j.chemosphere.2016.01.014 DOI: 10.1016/j.chemosphere.2016.01.014]</ref><ref name="Weber2017"/>.
| |
| | | | |
| − | Transformation studies published to date have tested only a small subsample of possible precursors and, therefore, much uncertainty exists regarding 1) the extent to which precursor transformation occurs on a global scale, 2) which environmental compartments represent the majority of transformation, 3) relevant environmental conditions that affect transformation processes, and 4) transformation rates and pathways. Nevertheless, a portion of the precursors are expected to transform to PFAAs over time as shown in Figure 3.
| + | When implementing TISR<sup>®</sup>, [[Wikipedia: Solar irradiance | solar insolation]] and groundwater velocity must be considered for optimal equipment sizing and cycling. Depending on remedial goals and site history and conditions, the TISR<sup>®</sup> system and target temperatures may be designed to enhance specific remedial mechanisms (e.g. hydrolysis over bioremediation). Recently Ornelles ''et al.''<ref name="Ornelles"/> developed an easy to use Excel-based model that can be used to optimize TISR<sup>®</sup> design and predict subsurface temperature changes over time. Frequent monitoring of the temperature and microbial community composition relative to targets is useful for evaluating treatment effectiveness and optimizing system performance. The system and target temperatures can be customized to enhance specific remedial mechanisms based on site conditions and goals. |
| | | | |
| − | Precursors can be transformed by a variety of abiotic processes including hydrolysis, photolysis, and oxidation. Hydrolysis of some precursors, followed by subsequent biotransformation, can produce perfluoroalkyl sulfonates (PFSAs). An important example is the production of PFOS from perfluorooctane sulfonyl fluoride (POSF)<ref name="Martin2010">Martin, J.W., Asher, B.J., Beesoon, S., Benskin, J.P. and Ross, M.S., 2010. PFOS or PreFOS? Are perfluorooctane sulfonate precursors (PreFOS) important determinants of human and environmental perfluorooctane sulfonate (PFOS) exposure? Journal of Environmental Monitoring, 12(11), pp.1979-2004. [https://doi.org/10.1039/C0EM00295J DOI: 10.1039/C0EM00295J] Free download from [https://www.researchgate.net/profile/Matthew_Ross3/publication/47415684_PFOS_or_PreFOS_Are_perfluorooctane_sulfonate_precursors_PreFOS_important_determinants_of_human_and_environmental_perfluorooctane_sulfonate_PFOS_exposure/links/00b7d520a6132da945000000.pdf ResearchGate]</ref>. Other hydrolysis reactions produce perfluoroalkyl carboxylates (PFCAs). At neutral pH, the hydrolysis of fluorotelomer-derived polymeric precursors results in the formation of monomeric precursors of PFOA and other PFAAs with half-lives of 50 to 90 years)<ref name="Washington2010">Washington, J.W., Ellington, J.J., Jenkins, T.M. and Yoo, H., 2010. Response to Comments on “Degradability of an Acrylate-Linked, Fluorotelomer Polymer in Soil”. Environmental Science and Technology, 44(2), pp. 849-850. [https://doi.org/10.1021/es902672q DOI: 10.1021/es902672q] [https://pubs.acs.org/doi/pdf/10.1021/es902672q Free Download from ACS].</ref>. Oxidation of precursors by hydroxyl radicals can occur in natural waters, with the fluorotelomer-derived precursors being oxidized relatively rapidly<ref name="Gauthier2005">Gauthier, S.A. and Mabury, S.A., 2005. Aqueous photolysis of 8: 2 fluorotelomer alcohol. Environmental Toxicology and Chemistry, 24(8), pp.1837-1846. [https://doi.org/10.1897/04-591R.1 DOI: 10.1897/04-591R.1] Free download from [https://www.researchgate.net/profile/Suzanne_Gauthier/publication/7609648_Aqueous_photolysis_of_8_2_fluorotelomer_alcohol/links/5ec16c4792851c11a86d9438/Aqueous-photolysis-of-8-2-fluorotelomer-alcohol.pdf ResearchGate].</ref><ref name="Plumlee2009">Plumlee, M.H., McNeill, K. and Reinhard, M., 2009. Indirect Photolysis of Perfluorochemicals: Hydroxyl Radical-Initiated Oxidation of N-Ethyl Perfluorooctane Sulfonamido Acetate (N-EtFOSAA) and Other Perfluoroalkanesulfonamides. Environmental Science and Technology, 43(10), pp.3662-3668. [https://doi.org/10.1021/es803411w DOI: 10.1021/es803411w] Free download from [https://www.researchgate.net/profile/Megan_Plumlee/publication/26309488_Indirect_Photolysis_of_Perfluorochemicals_Hydroxyl_Radical-Initiated_Oxidation_of_N-Ethyl_Perfluorooctane_Sulfonamido_Acetate_N-EtFOSAA_and_Other_Perfluoroalkanesulfonamides/links/5aac0437a6fdcc1bc0b8d002/Indirect-Photolysis-of-Perfluorochemicals-Hydroxyl-Radical-Initiated-Oxidation-of-N-Ethyl-Perfluorooctane-Sulfonamido-Acetate-N-EtFOSAA-and-Other-Perfluoroalkanesulfonamides.pdf ResearchGate].</ref>.
| + | ==Summary== |
| − | Evidence of aerobic biotransformation is provided from studies of PFAS composition throughout the continuum of wastewater treatments<ref name="Arvaniti2015">Arvaniti, O.S. and Stasinakis, A.S., 2015. Review on the occurrence, fate and removal of perfluorinated compounds during wastewater treatment. Science of the Total Environment, 524, pp. 81-92. [https://doi.org/10.1016/j.scitotenv.2015.04.023 DOI: 10.1016/j.scitotenv.2015.04.023]</ref>, from field studies at AFFF-impacted sites<ref name="Houtz2013"/><ref name="McGuire2014"/><ref name="Anderson2016"/><ref name="Weber2017"/>, and from microcosm experiments. In general, the literature on aerobic biotransformation collectively demonstrates or indirectly supports the following conclusions as summarized in ITRC 2020<ref name="ITRC2020"/>:
| + | TISR<sup>®</sup> is a cost-effective and adaptable technology that can be customized to address specific site challenges. It can be used as a standalone solution or be integrated with existing remediation strategies to enhance their effectiveness. TISR<sup>®</sup> is particularly effective in challenging hydrogeological conditions and can be optimized to suit specific treatment mechanisms. By shortening the active remediation timeframe, TISR<sup>®</sup> reduces lifecycle costs and minimizes the carbon footprint associated with the remediation process. |
| − | * Numerous aerobic biotransformation pathways exist with relatively rapid kinetics
| + | <br clear="right"/> |
| − | * All polyfluorinated precursors studied to date have the potential to aerobically biotransform to PFAAs
| |
| − | * Aerobic biotransformation of various fluorotelomer-derived precursors exclusively results in the formation of PFCAs, including PFOA, without necessarily the conservation of chain-length
| |
| − | * Aerobic biotransformation of various electrochemical fluorination-derived precursors primarily results in the formation of PFAAs, including PFOS, with the conservation of chain-length
| |
| − | Precursor transformation can complicate CSMs (and risk assessments) and should be considered during comprehensive site investigations. For example, atmospheric emissions of volatile precursors can result in long-range transport where subsequent transformation and deposition can result in detectable levels of PFAAs in environmental media independent of obvious point-sources<ref name="Vedagiri2018">Vedagiri, U.K., Anderson, R.H., Loso, H.M. and Schwach, C.M., 2018. Ambient levels of PFOS and PFOA in multiple environmental media. Remediation Journal, 28(2), pp. 9-51. [https://doi.org/10.1002/rem.21548 DOI: 10.1002/rem.21548]</ref>. With respect to site-related precursors, transformation of otherwise unmeasured PFAS into detectable PFAAs is obviously relevant to site investigations to the extent transformation occurs after initial site characterization efforts or if past remedial efforts have accelerated ''in situ'' transformation rates<ref name="McGuire2014"/>. Additionally, differential transport rates between precursor PFAS and the corresponding terminal PFAA could also confound CSMs if transformation rates are slower than transport rates as has been suggested<ref name="Weber2017"/>.
| |
| − | To account for otherwise unmeasurable precursors, several surrogate analytical methods have been developed. See [[PFAS Sampling and Analytical Methods]] for additional detail.
| |
| | | | |
| | ==References== | | ==References== |
| − | <references/> | + | <references /> |
| | | | |
| − | ==See Also:== | + | ==See Also== |
| | + | [https://vimeo.com/1019489395 TISR<sup>®</sup> Explanation Video] |
